Blog

Decompression, also known as suckback, is an important setting in injection molding that helps relieve pressure at the end of the injection process. As a professional plastic injection molding manufacturer, I am sharing this detailed look at what decompression is, why it’s important, and how it impacts the injection molding process. What is Decompression in […]

Dosing is a critical part of the injection molding process. It involves delivering a precise amount of plastic material, along with any necessary additives like colorants or reinforcements, into the injection molding machine. Getting the dosing step right is essential for producing consistent, high-quality plastic parts. So in this post, as a professional plastic injection

What is draft angle injection molding? Simply put, a draft angle is a taper that’s applied to the walls of injection molded plastic parts. Draft angles help with ejecting parts from the mold after the injection molding process. In this complete guide, as a professional plastic injection molding manufacturer, I’ll explain everything you need to

What is flash in injection molding? Well, flash refers to excess plastic that leaks out of the mold cavity during the injection molding process. It leaves thin “flaps” of plastic attached to the final part.

Gas assist injection molding is an innovative manufacturing process that produces hollow plastic parts. This technique combines traditional injection molding with pressurized inert gas to improve part quality, strength, surface finish and more. I’ve been getting a lot of questions lately about gas assist injection molding and how it works. As a professional plastic injection

Holding pressure is a critical yet often misunderstood aspect of the injection molding process. As a professional plastic injection molding manufacturer, I’m here to demystify this crucial parameter and explain exactly how holding pressure impacts your molded parts. Let’s start from the beginning – what even is holding pressure? A Definition of Holding Pressure In

Injection molding is a common manufacturing process used to produce plastic parts. One critical parameter that impacts part quality is the holding time. But what exactly is holding time and why does it matter? As a professional plastic injection molding manufacturer, I will help you find it out. What is Holding Time in Injection Molding

Un canal caliente es un sistema de suministro calentado que mantiene el plástico fundido mientras fluye hacia las cavidades del molde. Los canales calientes permiten que las piezas se produzcan más rápido, con menos residuos en comparación con los moldes tradicionales de canal frío. Como fabricante profesional de moldeo por inyección de plástico, voy a compartir todo sobre el canal caliente en el moldeo por inyección en este post.

Injection molding is one of the most versatile and widely-used manufacturing processes in the world. This production method is commonly utilized to mass produce plastic parts and products in a variety of shapes, sizes and complexities. But what exactly is injection molding used for? What types of applications and products use this manufacturing technique? In

El moldeo por inyección es uno de los procesos de fabricación más comunes para hacer piezas de plástico. Consiste en inyectar material plástico fundido a alta presión en la cavidad de un molde para darle la forma deseada. La presión de inyección es un parámetro crucial que determina la calidad de las piezas moldeadas por inyección. Como fabricante profesional de piezas de plástico moldeadas por inyección, compartiré con usted todos los detalles al respecto.